ITC
337-TA-1002
United States Steel Corp v. Xian Linkun Materials Steel Pipe Supplies Co Ltd
General
Category BasketAutomotive/Manufacturing/Transportation
HTS Number & Description
7208.10.15 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/patterns in relief, in coils, pickled, not clad/plated/coated
7208.10.30 - Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick 4.75mm+,not pickld,not clad/plated/coatd
7208.10.60 - Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick <4.75mm,not pickld,not clad/plated/coatd
7208.25.30 - Nonalloy hi-strength steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated
7208.25.60 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated
7208.26.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated
7208.27.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated
7208.36.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated
7208.37.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated
7208.38.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated
7208.39.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated
7208.40.30 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick 4.75 or more, n/clad/plated/coated
7208.40.60 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick < 4.75mm, not clad/plated/coated
7208.51.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated
7208.52.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/
7208.53.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated
7208.54.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated
7208.90.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated
7209.15.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 3mm+, not clad/plated/coated
7209.16.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
7209.17.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.5mm or more but n/o 1mm, not clad/plated/coated
7209.18.15 - Nonalloy hi-strength steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.5mm, not clad/plated/coated
7209.18.25 - Nonalloy steel(blackplate), width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.361mm, not clad/plated/coated
7209.18.60 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.361mm+ but less 5mm, not clad/plated/coated
7209.25.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 3mm or more, not clad/plated/coated
7209.26.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
7209.27.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 0.5mm+ but n/o 1mm, not clad/plated/coated
7209.28.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick less than 0.5mm, not clad/plated/coated
7209.90.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, not clad/plated/coated, nesoi
7210.11.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, w/thick. 0.5 mm or more
7210.12.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, less than 0.5 mm thick
7210.20.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with lead, including terneplate
7210.30.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically plated or coated with zinc
7210.41.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), corrugated
7210.49.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), not corrugated
7210.50.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with chromium oxides or with chromium and chromium oxides
7210.61.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum-zinc alloys
7210.69.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum o/than aluminum-zinc alloy
7210.70.30 - Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic but not plated/coated or clad w/metal
7210.70.60 - Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic, nesoi
7210.90.10 - Iron/nonalloy steel, width 600mm+, flat-rolled products, clad
7210.90.60 - Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically coated or plated with base metal, nesoi
7210.90.90 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated, nesoi
7211.13.00 - Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled universal mill plate, not clad/plated/coated
7211.14.00 - Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated
7211.19.15 - Nonalloy hi-strength steel, width less th/300mm, hot-rolled flat-rolled products, not clad/plated/coated
7211.19.20 - Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick o/1.25 mm but n/o 4.75 mm, n/clad/plated/coated
7211.19.30 - Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick 1.25mm or less, not clad/plated/coated
7211.19.45 - Nonalloy hi-strength steel, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not clad/plated/coated
7211.19.60 - Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, pickled, not clad/plated/coated
7211.19.75 - Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not pickled, not clad/plated/coated
7211.23.15 - Nonalloy hi-strength steel, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
7211.23.20 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
7211.23.30 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/0.25mm n/o 1.25mm, not clad/plated
7211.23.45 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick n/o 0.25mm, not clad/plated/coated
7211.23.60 - Iron/nonalloy steel, nesoi, width 300mm+ but less th/600mm, cold-rolled flat-rolled, <0.25% carbon, not clad/plated/coated
7211.29.20 - Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick o/0.25mm, not clad/plated/coated
7211.29.45 - Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick 0.25mm or less, not clad/plated/coated
7211.29.60 - Iron/nonalloy steel, width 300mm+ but less th/600mm, cold-rolled flat-rolled, w/0.25% or more carbon, not clad/plated/coated
7211.90.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled further worked than cold-rolled, not clad, plated or coated
7212.10.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated with tin
7212.20.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, electrolytically plated or coated with zinc
7212.30.10 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated with zinc (other than electrolytically), w/thick o/0.25mm
7212.30.30 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated w/zinc (other than electrolytically), w/thick 0.25mm or less
7212.30.50 - Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, plated or coated with zinc (other than electrolytically)
7212.40.10 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, painted, varnished or coated w/plastic
7212.40.50 - Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, painted, varnished or coated w/plastic
7212.50.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated nesoi
7212.60.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, clad
7219.11.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
7219.12.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
7219.13.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
7219.14.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
7219.21.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
7219.22.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
7219.23.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
7219.24.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
7219.31.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 4.75 mm or more
7219.32.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 3 mm or more but less than 4.75 mm
7219.33.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness o/1 mm but less than 3 mm
7219.34.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 0.5 mm or more but n/o 1 mm
7219.35.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of less than 0.5 mm
7219.90.00 - Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled
7225.11.00 - Alloy silicon electrical steel (grain-oriented), width 600mm+, flat-rolled products
7225.19.00 - Alloy silicon electrical steel (other than grain-oriented), width 600mm+, flat-rolled products
7225.30.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
7225.30.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
7225.30.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
7225.30.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
7225.40.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
7225.40.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
7225.40.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
7225.40.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
7225.50.10 - Alloy tool steel (o/th hi-speed), width 600mm+, cold-rolled flat-rolled products
7225.50.60 - Alloy steel (o/ than tool), width 600mm+, cold-rolled flat-rolled products, w/thickness 4.75 mm or more
7225.50.70 - Alloy heat-resisting steel, width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.50.80 - Alloy steel (o/th heat-resisting), width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.91.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc
7225.92.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically)
7225.99.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi
7226.11.10 - Alloy silicon electrical steel (grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.11.90 - Alloy silicon electrical steel (grain-oriented), width less th/300mm, flat-rolled products
7226.19.10 - Alloy silicon electrical steel (o/than grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.19.90 - Alloy silicon electrical steel (o/than grain-oriented), width less th/300mm, flat-rolled products
7226.20.00 - Alloy high-speed steel, width less th/600mm, flat-rolled products of high-speed steel
7226.91.05 - Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products
7226.91.15 - Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products
7226.91.25 - Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products
7226.91.50 - Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
7226.91.70 - Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.91.80 - Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.92.10 - Alloy tool steel (o/than hi-speed), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.30 - Alloy tool steel (o/than hi-speed), width less th/300mm, cold-rolled flat-rolled products
7226.92.50 - Alloy steel (o/than tool), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.70 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
7226.92.80 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness o/0.25 mm
7226.99.01 - Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi
7304.10.50 - Alloy steel, seamless line pipe used for oil or gas pipelines
7304.19.10 - Iron (o/than cast) or nonalloy steel, seamless line pipe used for oil and gas pipelines
7304.19.50 - Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines
7304.23.30 - Iron (o/than cast) or nonalloy steel, seamless drill pipe, of a kind used in drilling for oil or gas
7304.23.60 - Alloy (other than stainless) steel, seamless drill pipe, of a kind used in drilling for oil or gas
7304.29.10 - Iron (o/than cast) or nonalloy steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
7304.29.20 - Iron (o/than cast) or nonalloy steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
7304.29.31 - Alloy (other than stainless) steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
7304.29.41 - Alloy (other than stainless) steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
7304.29.50 - Iron (o/than cast) or nonalloy, seamless tubing, of a kind used in drilling for oil or gas
7304.29.61 - Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas
7304.31.30 - Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, hollow bars w/circular cross section
7304.31.60 - Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, tubes, pipes & hollow profiles, w/circular cross section, nesoi
7304.39.00 - Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi
7304.41.30 - Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam less than 19mm
7304.41.60 - Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam of 19mm or more
7304.51.10 - Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings
7304.51.50 - Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section, nesoi
7304.59.10 - Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings
7304.59.20 - Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for boilers, heaters, etc
7304.59.60 - Heat-resisting alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., nesoi
7304.59.80 - Alloy steel (o/than heat-resist or stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes and hollow prof., w/circ. cross sect., nesoi
7304.90.10 - Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
7304.90.30 - Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
7304.90.50 - Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
7304.90.70 - Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
7305.11.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas
7305.11.50 - Alloy steel, seamed, circ. w/cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas pipelines
7305.12.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas
7305.12.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas pipelines
7305.19.10 - Iron or nonalloy steel, seamed, w/circ. cross sect.& ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas
7305.19.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas pipelines
7305.20.20 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
7305.20.40 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drill. for oil/gas
7305.20.60 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
7305.20.80 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drilling for oil/gas
7305.31.20 - Steel, long. welded, w/circ. cross sect & ext. diam o/406.4mm, tapered pipes and tubes principally used as pts of illuminating arts.
7305.31.40 - Iron or nonalloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
7305.31.60 - Alloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
7305.39.10 - Iron or nonalloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
7305.39.50 - Alloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
7305.90.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/th used in oil/gas drill.etc
7305.90.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/than used in oil/gas drill. or pipelines
7306.19.10 - Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines
7306.19.51 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil an
7306.29.10 - Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drill. oil/gas
7306.29.20 - Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing kind used drill for oil/gas
7306.29.31 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind us
7306.29.60 - Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas
7306.29.81 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling
7306.30.10 - Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm
7306.30.30 - Nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. of illum. arts.
7306.30.50 - Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, pipes, tubes & holl. prof., w/wall thick. of 1.65 mm or more
7306.50.10 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. less th/1.65 mm
7306.50.30 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. illum
7306.50.50 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. of 1.65 mm+
7306.61.10 - Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.61.30 - Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.61.50 - Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.61.70 - Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.69.10 - Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.69.30 - Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.69.50 - Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.69.70 - Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.90.10 - Iron or nonalloy steel, seamed o/welded, w/non-circ. x-sect. or circ. x-sect. w/ext. diam. 406.4mm or less, tubes, pipes & hollow profiles
7306.90.50 - Alloy steel, seamed o/than welded, w/non-circ. x-sect or circ. x-sect w/ext. diam. 406.4mm or less, tubes, pipes and hollow profiles
7208.10.30 - Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick 4.75mm+,not pickld,not clad/plated/coatd
7208.10.60 - Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick <4.75mm,not pickld,not clad/plated/coatd
7208.25.30 - Nonalloy hi-strength steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated
7208.25.60 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated
7208.26.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated
7208.27.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated
7208.36.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated
7208.37.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated
7208.38.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated
7208.39.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated
7208.40.30 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick 4.75 or more, n/clad/plated/coated
7208.40.60 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick < 4.75mm, not clad/plated/coated
7208.51.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated
7208.52.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/
7208.53.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated
7208.54.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated
7208.90.00 - Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated
7209.15.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 3mm+, not clad/plated/coated
7209.16.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
7209.17.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.5mm or more but n/o 1mm, not clad/plated/coated
7209.18.15 - Nonalloy hi-strength steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.5mm, not clad/plated/coated
7209.18.25 - Nonalloy steel(blackplate), width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.361mm, not clad/plated/coated
7209.18.60 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.361mm+ but less 5mm, not clad/plated/coated
7209.25.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 3mm or more, not clad/plated/coated
7209.26.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
7209.27.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 0.5mm+ but n/o 1mm, not clad/plated/coated
7209.28.00 - Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick less than 0.5mm, not clad/plated/coated
7209.90.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, not clad/plated/coated, nesoi
7210.11.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, w/thick. 0.5 mm or more
7210.12.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, less than 0.5 mm thick
7210.20.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with lead, including terneplate
7210.30.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically plated or coated with zinc
7210.41.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), corrugated
7210.49.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), not corrugated
7210.50.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with chromium oxides or with chromium and chromium oxides
7210.61.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum-zinc alloys
7210.69.00 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum o/than aluminum-zinc alloy
7210.70.30 - Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic but not plated/coated or clad w/metal
7210.70.60 - Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic, nesoi
7210.90.10 - Iron/nonalloy steel, width 600mm+, flat-rolled products, clad
7210.90.60 - Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically coated or plated with base metal, nesoi
7210.90.90 - Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated, nesoi
7211.13.00 - Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled universal mill plate, not clad/plated/coated
7211.14.00 - Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated
7211.19.15 - Nonalloy hi-strength steel, width less th/300mm, hot-rolled flat-rolled products, not clad/plated/coated
7211.19.20 - Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick o/1.25 mm but n/o 4.75 mm, n/clad/plated/coated
7211.19.30 - Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick 1.25mm or less, not clad/plated/coated
7211.19.45 - Nonalloy hi-strength steel, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not clad/plated/coated
7211.19.60 - Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, pickled, not clad/plated/coated
7211.19.75 - Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not pickled, not clad/plated/coated
7211.23.15 - Nonalloy hi-strength steel, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
7211.23.20 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
7211.23.30 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/0.25mm n/o 1.25mm, not clad/plated
7211.23.45 - Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick n/o 0.25mm, not clad/plated/coated
7211.23.60 - Iron/nonalloy steel, nesoi, width 300mm+ but less th/600mm, cold-rolled flat-rolled, <0.25% carbon, not clad/plated/coated
7211.29.20 - Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick o/0.25mm, not clad/plated/coated
7211.29.45 - Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick 0.25mm or less, not clad/plated/coated
7211.29.60 - Iron/nonalloy steel, width 300mm+ but less th/600mm, cold-rolled flat-rolled, w/0.25% or more carbon, not clad/plated/coated
7211.90.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled further worked than cold-rolled, not clad, plated or coated
7212.10.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated with tin
7212.20.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, electrolytically plated or coated with zinc
7212.30.10 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated with zinc (other than electrolytically), w/thick o/0.25mm
7212.30.30 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated w/zinc (other than electrolytically), w/thick 0.25mm or less
7212.30.50 - Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, plated or coated with zinc (other than electrolytically)
7212.40.10 - Iron/nonalloy steel, width less th/300mm, flat-rolled products, painted, varnished or coated w/plastic
7212.40.50 - Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, painted, varnished or coated w/plastic
7212.50.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated nesoi
7212.60.00 - Iron/nonalloy steel, width less th/600mm, flat-rolled products, clad
7219.11.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
7219.12.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
7219.13.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
7219.14.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
7219.21.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
7219.22.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
7219.23.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
7219.24.00 - Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
7219.31.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 4.75 mm or more
7219.32.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 3 mm or more but less than 4.75 mm
7219.33.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness o/1 mm but less than 3 mm
7219.34.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 0.5 mm or more but n/o 1 mm
7219.35.00 - Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of less than 0.5 mm
7219.90.00 - Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled
7225.11.00 - Alloy silicon electrical steel (grain-oriented), width 600mm+, flat-rolled products
7225.19.00 - Alloy silicon electrical steel (other than grain-oriented), width 600mm+, flat-rolled products
7225.30.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
7225.30.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
7225.30.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
7225.30.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
7225.40.11 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
7225.40.30 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
7225.40.51 - Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
7225.40.70 - Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
7225.50.10 - Alloy tool steel (o/th hi-speed), width 600mm+, cold-rolled flat-rolled products
7225.50.60 - Alloy steel (o/ than tool), width 600mm+, cold-rolled flat-rolled products, w/thickness 4.75 mm or more
7225.50.70 - Alloy heat-resisting steel, width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.50.80 - Alloy steel (o/th heat-resisting), width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
7225.91.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc
7225.92.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically)
7225.99.00 - Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi
7226.11.10 - Alloy silicon electrical steel (grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.11.90 - Alloy silicon electrical steel (grain-oriented), width less th/300mm, flat-rolled products
7226.19.10 - Alloy silicon electrical steel (o/than grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
7226.19.90 - Alloy silicon electrical steel (o/than grain-oriented), width less th/300mm, flat-rolled products
7226.20.00 - Alloy high-speed steel, width less th/600mm, flat-rolled products of high-speed steel
7226.91.05 - Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products
7226.91.15 - Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products
7226.91.25 - Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products
7226.91.50 - Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
7226.91.70 - Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.91.80 - Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
7226.92.10 - Alloy tool steel (o/than hi-speed), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.30 - Alloy tool steel (o/than hi-speed), width less th/300mm, cold-rolled flat-rolled products
7226.92.50 - Alloy steel (o/than tool), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
7226.92.70 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
7226.92.80 - Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness o/0.25 mm
7226.99.01 - Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi
7304.10.50 - Alloy steel, seamless line pipe used for oil or gas pipelines
7304.19.10 - Iron (o/than cast) or nonalloy steel, seamless line pipe used for oil and gas pipelines
7304.19.50 - Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines
7304.23.30 - Iron (o/than cast) or nonalloy steel, seamless drill pipe, of a kind used in drilling for oil or gas
7304.23.60 - Alloy (other than stainless) steel, seamless drill pipe, of a kind used in drilling for oil or gas
7304.29.10 - Iron (o/than cast) or nonalloy steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
7304.29.20 - Iron (o/than cast) or nonalloy steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
7304.29.31 - Alloy (other than stainless) steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
7304.29.41 - Alloy (other than stainless) steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
7304.29.50 - Iron (o/than cast) or nonalloy, seamless tubing, of a kind used in drilling for oil or gas
7304.29.61 - Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas
7304.31.30 - Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, hollow bars w/circular cross section
7304.31.60 - Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, tubes, pipes & hollow profiles, w/circular cross section, nesoi
7304.39.00 - Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi
7304.41.30 - Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam less than 19mm
7304.41.60 - Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam of 19mm or more
7304.51.10 - Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings
7304.51.50 - Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section, nesoi
7304.59.10 - Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings
7304.59.20 - Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for boilers, heaters, etc
7304.59.60 - Heat-resisting alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., nesoi
7304.59.80 - Alloy steel (o/than heat-resist or stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes and hollow prof., w/circ. cross sect., nesoi
7304.90.10 - Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
7304.90.30 - Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
7304.90.50 - Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
7304.90.70 - Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
7305.11.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas
7305.11.50 - Alloy steel, seamed, circ. w/cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas pipelines
7305.12.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas
7305.12.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas pipelines
7305.19.10 - Iron or nonalloy steel, seamed, w/circ. cross sect.& ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas
7305.19.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas pipelines
7305.20.20 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
7305.20.40 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drill. for oil/gas
7305.20.60 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
7305.20.80 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drilling for oil/gas
7305.31.20 - Steel, long. welded, w/circ. cross sect & ext. diam o/406.4mm, tapered pipes and tubes principally used as pts of illuminating arts.
7305.31.40 - Iron or nonalloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
7305.31.60 - Alloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
7305.39.10 - Iron or nonalloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
7305.39.50 - Alloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
7305.90.10 - Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/th used in oil/gas drill.etc
7305.90.50 - Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/than used in oil/gas drill. or pipelines
7306.19.10 - Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines
7306.19.51 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil an
7306.29.10 - Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drill. oil/gas
7306.29.20 - Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing kind used drill for oil/gas
7306.29.31 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind us
7306.29.60 - Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas
7306.29.81 - Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling
7306.30.10 - Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm
7306.30.30 - Nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. of illum. arts.
7306.30.50 - Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, pipes, tubes & holl. prof., w/wall thick. of 1.65 mm or more
7306.50.10 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. less th/1.65 mm
7306.50.30 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. illum
7306.50.50 - Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. of 1.65 mm+
7306.61.10 - Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.61.30 - Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.61.50 - Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.61.70 - Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.69.10 - Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.69.30 - Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
7306.69.50 - Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.69.70 - Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
7306.90.10 - Iron or nonalloy steel, seamed o/welded, w/non-circ. x-sect. or circ. x-sect. w/ext. diam. 406.4mm or less, tubes, pipes & hollow profiles
7306.90.50 - Alloy steel, seamed o/than welded, w/non-circ. x-sect or circ. x-sect w/ext. diam. 406.4mm or less, tubes, pipes and hollow profiles
Complainant
Attorney
Name | Ratings |
|---|---|
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A | |
L5 A |
No Attorneys
Respondent
Party
Name | Ratings |
|---|---|
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- | |
-- -- -- |
No Parties
Attorney
No Attorneys